Fix2Car adjustable Google Pixel 3 / Pixel XL holder with full swivel dash mount + non-removable USB cable + USB car charger adapter
Suitable for Google Pixel 3 / Pixel XL in a case, or without a case
Suitable for Brodit ProClip mount
Fix2Car adjustable universal holder suitable for Google Pixel 3 / Pixel XL with USB-C(Type-C) - USB cable and 12/24v, 2.1A car charging adapter is designed to hold your Google Pixel 3 / Pixel XL with, or without a case, and keeps your device fully charged whilst it's in cradle.
Fix2Car cradle is adjustable, so it is suitable for Google Pixel 3 / Pixel XL, or almost any centrally mounted USB-C(Type-C) device width of 58mm-95mm, and is suitable for device in a skin or bumper case. If you have a car with USB interface in your vehicle, you can disconnect the USB car charging adapter from the holder's USB cable in order to connect your Google Pixel 3 / Pixel XL directly to the USB connector in your vehicle's audio interface. Fix2Car USB-C(Type-C) in car holder is easy to use and has a full tilt and swivel backing.
This active holder adjustable is suitable for most centrally mounted USB-C(Type-C) port devices width of 58mm-95mm, including Google Pixel 3 / Pixel XL.
My Google Pixel 3 / Pixel XL has a case or cover on it, is this Fix2Car holder suitable?
Yes, this Fix2Car holder is ideal for a Google Pixel 3 / Pixel XL in case. Fix2Car adjustable holder is designed for naked device, or device in a slim size skin or bumper case.
- Adjustable USB-C(Type-C) holder with USB cable and USB car charging adapter, suitable for Google Pixel 3 / Pixel XL.
- Suitable for device width 58mm-95mm
- Mount for installation on to dash or car specific pre-mount (car specific pre-mount not included, we highly recommend Brodit ProClip mount.)
- 12/24 volt, 2.1a USB car charger adapter plug
Please note, Brodit ProClip shown in image is sold separately.
Installing Fix2Car holder onto in car dash
Fix2car holder comes with necessary screw to install this holder onto dash. Please note, this holder is mounted using screws. If you prefer not to drill holes onto your car dash, you may wish to look into mounting this holder onto Brodit ProClip pre-mount, sold separately. Please click here for guide to install Fix2Car holder.
Installing Fix2Car holder onto Brodit ProClip
To install this Fix2Car adjustable holder in your vehicle, we highly recommend Brodit ProClip pre-mount platform, sold separately. Brodit ProClip can be easily installed without drilling holes in your vehicle. Please click here for guide to install Fix2Car holder.
You may be interested in.
You may also be interested in German made Herbert Richter adjustable holder and swivel backing mount suitable for Brodit ProClip.
Made to high European standards, designed and manufactured in Denmark by Kram, Fix2Car adjustable holders are designed around functions and workings of your device. From very first sketch, Fix2Car have always based their design around function and workings of individual design of individual Smartphone. Placement of sockets and buttons are just there to keep your device securely in place and functional.
Innovative design of backing mounts fits all Fix2Car phone cradles, thus even though holders are manufactured to outlive the phone, you can simply switch to a different cradle that fits your new device in future without changing the whole setup.